News
Yes, DTF transfers work on burnout tees. How burnout fabric differs, the right press temperature and pressure, which designs keep the shirt soft, care tips, and how to order.
Yes, DTF transfers work well on acid-wash and mineral-wash shirts. Learn which colors and designs pop on the marbled background, how to press soft washed cotton, and how to keep prints looking good.
Usually, yes. Many DTF transfer instructions call for a main press, then peeling the film, then a short second press with a cover sheet. That second press, often called a post-press, pushes the ink and adhesive deeper into the fabric. It helps the print feel softer, look less shiny, and hold up better in the wash. Follow your transfer's instructions.
Yes, DTF transfers can go on many beanies. Learn which beanies work, why the folded cuff is the best spot, how to size the design, and how to press knit without stretching it.
A heat press burns shirts when the fabric gets more heat, pressure, or time than it can handle. Common causes are a press that runs hotter than its display, settings meant for cotton used on polyester, heavy pressure, or no cover sheet. Lower one setting at a time, test on scrap fabric, and protect the shirt with a cover sheet.
How to test-press a DTF transfer on a scrap shirt before the real one: what to use, step-by-step pressing, how to check the result, and what to change if it fails.