News
Most left-chest logos work best at about 2.5 to 4 inches wide on adult tees. Shorter, wider marks often sit near 3 to 3.5 inches; taller crests may stay closer to 2.5 to 3 inches wide so they do not dominate the chest. Size youth logos smaller, and always measure the printable area on a sample shirt.
Yes. Pre-press the shirt for a few seconds before you place the DTF transfer. That quick press drives out moisture and flattens wrinkles so the adhesive contacts the fabric evenly. Skip it, and you raise the chance of bubbles, weak edges, or a print that lifts after washing.
Yes, DTF can print on hoodies. The adhesive bonds to cotton and cotton/polyester blend fleece the same way it bonds to tees. Use firm pressure, mind the pocket and seams, and size the design for the printable chest or back area so the transfer sits flat under the platen.
A practical San Antonio buying guide to single DTF transfers, larger prints, and 12-inch-wide gang sheets for small shops and holiday orders.
Yes, you can heat press DTF on 100% polyester. DTF adhesive bonds to polyester fibers as well as cotton. Use firm pressure, follow your transfer's temperature and time settings, and watch for press marks on sensitive performance fabrics by testing a scrap or a hidden area first.